Features:
1) Type: slashing
2) Sizing mode: double-dip-double-nip or double-dip-four-nip
3) Drying mode: full-drying cylinder mode, two webs are pre-dried by two drying
cylinders respectively, then assembled, and dried by second set of drying cylinders
4) The elongation of warp in each section is displayed and slightly adjusted
5) The temperature, squeezing pressure, unwinding tension, rewinding tension and
regain are automatically controlled

Main parameters
1) Working width:
a) Warp beam creel: 1,800 or 2,000
b) Size box: 1,800 or 2,000mm
c) Drying house 1,800 or 2,000mm
2) Automatic width adjusting machine: 2,000~3,800mm as per client's requirements
3) Applicable warp beam: flange diameter Φ550-1,016mm
4) Range of running speed: 0.5~70m/min (0.5m/min snail speed)
5) Steam pressure:
a) Max. working pressure of drying cylinder 0.36MPa
b) Normal working pressure 0.20-0.25MPa
6) Max. squeezing pressure: 40kN
7) Temperature of size box : 98-99°C
8) Evaporation rate of drying house: 600-800kg/h (SGA313B)
9) Max. winding tension: 5kN